Contact Us

Phone
02 9476 6639

Email
info@bespokecraft.com.au

Online Enquiry

* Required fields

5 Bars Jeeves Spartan Boxx Heated Towel Rail

Item Code: BCT52SPR
Price:  $2,179.00 incl. GST

5 Bars Jeeves Spartan Boxx Heated Towel Rail

Item Code: BCT52SPR
Price:  $2,179.00 incl. GST

Description:

Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The T5SPR is a Liquid Filled Rail, this means the heated towel rail is filled with liquid and heated by an electric element. As the water particles increase in temperature, they circulate in the rail thereby heating the entire rail. Liquid Filled rails run at a higher temperature than an equivalent electric heated towel rail and help to add some heat to the room as well as warming and drying the towels.

The towel dryer is 520x930mm with five horizontal bars in a polished stainless finish in a box shape design to add a feature to your room. The Heated Towel Rail comes as a prefilled unit meaning it is simply wired up like a standard towel rail on site. If the element was ever to fail it can be replaced without needing to replace the rail. The wiring position for the rail comes as standard on the right-hand side.

A Liquid Filled Heated Towel Rail will take closer to an hour to reach a maximum temperature of around 55 -60 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs.

W520xH930xD118mm

Output 90Watts
IP Rating IPX5
Warranty 25yrs on rail and 5yrs on element
Lead Length 1.4m
Voltage 240Volt
No of Bars 5
Wiring Type Concealed (hardwired)
Wiring Position Bottom right hand side
Distance Between Mounting Points (Top to Bottom) 745mm
Distance Between Mounting Points (Left to Right) 488mm

PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on site or verifying the details with the manufacturer. Thermogroup cannot be held liable or responsible for errors due to updated specifications.